+966 54 614 8678 [email protected] WhatsApp
JTE FastenersBolting & hardware, Al Jubail العربية Request a quote

ASTM A194 Grade 7 heavy hex nuts

Chromium-molybdenum alloy steel heavy hex nuts for L7 low-temperature and B16 high-temperature stud bolts, with Charpy-tested 7L nuts for cold service.

ASTM A194 Grade 7 is a quenched and tempered chromium-molybdenum alloy steel heavy hex nut with a hardness of 24 to 38 HRC and a proof stress of 175 ksi. It is the usual nut for A320 L7 low-temperature studs, which Saudi Aramco SAES-L-109 pairs with Grade 4 or 7 nuts down to about −101 °C. For cold service it is ordered with Charpy impact testing (supplementary requirement S3) and marked 7L.

Material
Cr-Mo alloy steel (C 0.37–0.49%, Cr 0.75–1.20%, Mo 0.15–0.25%)
Min tempering
1100 °F (593 °C)
Hardness
24–38 HRC
Proof stress
175 ksi (heavy hex)
Cold service
7L: S3 Charpy tested
Pairs with
ASTM A320 L7, A193 B16, A193 B7
Marking
7 or 7L and maker’s mark
Finishes
Plain, PTFE / Xylan
LNG and cold-service plant bolted with L7 studs and Grade 7 nuts
Cold service is where Charpy-tested 7L nuts earn their place.
Zinc coated heavy hex nuts
Flanged pipe joints clamped with stud bolts and heavy hex nuts

A194 nut grades compared

The five heat-treated grades used on Saudi flanges, side by side.

ASTM A194 heat-treated heavy hex nut grades
GradeMaterialMin temperingHardnessProof stress (heavy hex)Typical stud
2HMedium carbon steel, quenched and tempered850 °F (454 °C)24–38 HRC175 ksi (1,207 MPa)A193 B7
2HMMedium carbon steel, quenched and tempered, hardness-limited1150 °F (621 °C)159–237 HB (22 HRC max)150 ksi (1,034 MPa)A193 B7M
4Carbon-molybdenum steel, quenched and tempered (removed from A194 in 2017)1100 °F (593 °C)24–38 HRC175 ksi (1,207 MPa)A193 B16, A320 L7
7Chromium-molybdenum alloy steel, quenched and tempered1100 °F (593 °C)24–38 HRC175 ksi (1,207 MPa)A320 L7, A193 B16, A193 B7
7MChromium-molybdenum alloy steel, quenched and tempered, hardness-limited1150 °F (621 °C)159–237 HB (22 HRC max)150 ksi (1,034 MPa)A320 L7M

Values from ASTM A194 for heavy hex nuts (coarse and 8-pitch threads); 24–38 HRC is about 248–352 HB. Always order to the edition your specification names.

Nut compatibility chartAll nuts

Saudi Arabia requirements for Grade 7 nuts

Saudi Aramco SAES-L-109 uses Grade 7 for low-temperature bolting, and Grade 7 is the ASTM replacement for Grade 4 in hot service.

Grade 7 nuts in Saudi Aramco requirements
RequirementWhat it means
Low temperature (SAES-L-109, Table 5)A320 L7 studs with A194 Grade 4 or 7 nuts, about −101 to 343 °C.
When it is required (13.2.2)For flanges that can auto-refrigerate if they leak.
Low-temperature testingSpecify S3 Charpy testing; tested nuts are marked 7L.
High temperature (Table 5)SAES-L-109 names Grade 4 with B16. Grade 7 is the ASTM substitute for Grade 4, used where the owner accepts it.
Coated cold-service sets (13.3)Coating to 09-SAMSS-107 where the environment calls for it.
Vendor statusJTE Fasteners is ISO 9001 certified and a registered Saudi Aramco and SABIC vendor.

Summarised from Saudi Aramco SAES-L-109 (29 January 2018 edition). Always work to the current revision, the plant specification and your purchase order.

Where Grade 7 nuts are used

Cold flanges first, and hot ones where Grade 7 replaces Grade 4.

LNG and NGL piping

Cold flanges on liquefied gas lines.

Auto-refrigerating lines

Light hydrocarbon flanges that chill when they leak.

B16 hot service

High-temperature flanges where Grade 7 replaces Grade 4.

L7 / 7L sets

Studs and Charpy-tested nuts certified together.

Coated sets

PTFE-coated L7 studs with Grade 7 nuts.

B7 joints

Grade 7 is also compatible with B7 studs.

Charpy tested when it matters

For cold service we supply 7L nuts with Charpy results; for hot service, standard Grade 7.

  • 7: standard
  • 7L: S3 Charpy tested
  • 24–38 HRC
  • 175 ksi proof stress

L7 / L7M stud bolts

Documents with every order

Each lot is traceable to its heat, with Charpy results for 7L nuts.

  • EN 10204 3.1 with heat number
  • Charpy results for 7L
  • 3.2 with third-party inspection
  • PMI on request

Quality and certificates

A194 Grade 7 nut questions

What is an ASTM A194 Grade 7 nut?

A heavy hex nut of quenched and tempered chromium-molybdenum alloy steel, 24–38 HRC with a 175 ksi proof stress, used mainly with A320 L7 low-temperature studs.

What is the difference between Grade 7 and 7L?

7L is a Grade 7 nut that has passed Charpy impact testing under A194 supplementary requirement S3; the L is added to the marking.

What is the difference between Grade 7 and 7M?

7M is hardness-limited (159–237 HB, 22 HRC maximum) and tempered at 1150 °F for sour or cold sour service, with a 150 ksi proof stress. Grade 7 is 24–38 HRC with 175 ksi.

Which studs take Grade 7 nuts?

A320 L7, A193 B16 and A193 B7.

Can Grade 7 replace Grade 4?

ASTM names Grade 7 as the substitute for Grade 4, which was removed from A194 in 2017. On Saudi Aramco work, confirm with the owner, because SAES-L-109 still names Grade 4.

Related

L7 / L7M stud bolts

Low-temperature studs for Grade 7 nuts.

A194 Grade 4 nuts

The grade Grade 7 replaced.

A194 7M nuts

Hardness-limited version for cold sour service.

Cold or hot service bolting?

Send the stud grade, size and service temperature: we supply Grade 7 or 7L nuts with certificates.

Request a quote+966 54 614 8678