ASTM A194 Grade 4 heavy hex nuts
Carbon-molybdenum heavy hex nuts named in Saudi Aramco SAES-L-109 for B16 high-temperature and L7 low-temperature bolting, with Grade 7 as the ASTM substitute.
ASTM A194 Grade 4 is a quenched and tempered carbon-molybdenum steel heavy hex nut with a hardness of 24 to 38 HRC and a proof stress of 175 ksi. ASTM removed Grade 4 from A194 in 2017 and named Grade 7, which is mechanically identical, as its substitute. Saudi Aramco SAES-L-109 (2018 edition) still lists Grade 4 with B16 and L7 studs. JTE Fasteners supplies the grade your specification names, or Grade 7 where the purchaser accepts the substitution.
- Material
- Carbon-molybdenum steel (C 0.40–0.50%, Mo 0.20–0.30%)
- Min tempering
- 1100 °F (593 °C)
- Hardness
- 24–38 HRC
- Proof stress
- 175 ksi (heavy hex)
- ASTM status
- Removed from A194 in 2017
- ASTM substitute
- Grade 7
- Pairs with
- ASTM A193 B16, A320 L7
- Marking
- 4 and maker’s mark



A194 nut grades compared
The five heat-treated grades used on Saudi flanges, side by side.
| Grade | Material | Min tempering | Hardness | Proof stress (heavy hex) | Typical stud |
|---|---|---|---|---|---|
| 2H | Medium carbon steel, quenched and tempered | 850 °F (454 °C) | 24–38 HRC | 175 ksi (1,207 MPa) | A193 B7 |
| 2HM | Medium carbon steel, quenched and tempered, hardness-limited | 1150 °F (621 °C) | 159–237 HB (22 HRC max) | 150 ksi (1,034 MPa) | A193 B7M |
| 4 | Carbon-molybdenum steel, quenched and tempered (removed from A194 in 2017) | 1100 °F (593 °C) | 24–38 HRC | 175 ksi (1,207 MPa) | A193 B16, A320 L7 |
| 7 | Chromium-molybdenum alloy steel, quenched and tempered | 1100 °F (593 °C) | 24–38 HRC | 175 ksi (1,207 MPa) | A320 L7, A193 B16, A193 B7 |
| 7M | Chromium-molybdenum alloy steel, quenched and tempered, hardness-limited | 1150 °F (621 °C) | 159–237 HB (22 HRC max) | 150 ksi (1,034 MPa) | A320 L7M |
Values from ASTM A194 for heavy hex nuts (coarse and 8-pitch threads); 24–38 HRC is about 248–352 HB. Always order to the edition your specification names.
Saudi Arabia requirements for Grade 4 nuts
Saudi Aramco SAES-L-109 still names Grade 4 for hot and cold bolting, so you will see it on Saudi purchase orders even though ASTM has dropped it.
| Requirement | What it means |
|---|---|
| High temperature (SAES-L-109, Table 5) | A193 B16 studs with A194 Grade 4 nuts, about 450 to 645 °C. |
| Low temperature (Table 5) | A320 L7 studs with A194 Grade 4 or 7 nuts, about −101 to 343 °C. |
| Low-temperature testing | Specify A194 supplementary requirement S3 (Charpy impact); tested nuts carry an “L” in the marking. |
| Substitution | ASTM names Grade 7 as the substitute for Grade 4. Confirm with the plant owner before substituting on a Saudi Aramco line. |
| Above 450 °C (13.4.2) | Belleville washers may be required after Piping Standards Committee review. |
| Vendor status | JTE Fasteners is ISO 9001 certified and a registered Saudi Aramco and SABIC vendor. |
Summarised from Saudi Aramco SAES-L-109 (29 January 2018 edition). Always work to the current revision, the plant specification and your purchase order.
Where Grade 4 nuts are used
Mostly where older or Saudi Aramco specifications name them.
Hot oil and steam flanges
B16 bolting above the B7 limit.
Heaters and reactors
High-temperature nozzle and manway flanges.
Cold service
L7 bolting on cryogenic and auto-refrigerating lines.
Older line classes
Specifications written before 2017 that still name Grade 4.
Matched sets
B16 or L7 studs with certified nuts.
Grade 7 alternative
Mechanically identical, where the owner accepts it.
Grade 4 or Grade 7?
Both have the same hardness and proof stress and differ only in chemistry. We supply the grade your specification names.
- Grade 4: C-Mo steel
- Grade 7: Cr-Mo steel
- Both 24–38 HRC
- Both 175 ksi proof stress
Documents with every order
Each lot is traceable to its heat, with Charpy results for low-temperature nuts.
- EN 10204 3.1 with heat number
- Charpy results for S3 (L) nuts
- 3.2 with third-party inspection
- PMI on request
A194 Grade 4 nut questions
Is A194 Grade 4 still a valid grade?
ASTM removed Grade 4 from A194 in 2017. It is still named in older specifications and in Saudi Aramco SAES-L-109 Table 5, so purchase orders may still call for it; the order should name the edition.
What replaced A194 Grade 4?
Grade 7. ASTM named it as the substitute; both have a hardness of 24–38 HRC and a proof stress of 175 ksi.
Which studs use Grade 4 nuts?
A193 B16 for high temperature and A320 L7 for low temperature.
Can I use Grade 7 instead of Grade 4 on a Saudi Aramco job?
Technically they are interchangeable, but SAES-L-109 Table 5 names Grade 4, so get the owner’s or engineer’s approval before substituting.
What does an L in a nut marking mean?
The nut has passed Charpy impact testing to A194 supplementary requirement S3 for low-temperature service, for example 4L or 7L.
Related
B16 stud bolts
High-temperature studs for Grade 4 nuts.
L7 / L7M stud bolts
Low-temperature studs.
A194 Grade 7 nuts
The ASTM substitute for Grade 4.
Grade 4 or Grade 7 nuts?
Tell us the stud grade and the specification: we supply the nut it names, with certificates.