Pipe fittings: butt-weld to ASME B16.9 and forged to ASME B16.11
Elbows, tees, reducers, caps, stub ends, couplings, unions, swages and branch outlets in carbon, low-temperature, alloy, stainless and duplex steel. We supply them from established manufacturers, check them in Al Jubail and ship them with EN 10204 3.1 certificates.
Pipe fittings are the elbows, tees, reducers, caps, couplings and branch outlets that turn, reduce, branch or close a pipeline; JTE supplies butt-weld fittings to ASME B16.9 and forged socket-weld and threaded fittings to ASME B16.11. Butt-weld fittings match the pipe schedule and cover NPS 1/2 to 48. Forged fittings cover NPS 1/8 to 4 in Class 2000, 3000, 6000 and 9000. The fitting material follows the pipe: A234 WPB with A106 Grade B, A420 WPL6 for cold service, A403 WP316L for stainless, and A105, A350 LF2 or A182 for forgings.
- Butt-weld standard
- ASME B16.9; MSS SP-43 for light-wall stainless (Sch 5S and 10S)
- Forged standard
- ASME B16.11 socket weld and threaded (NPT to ASME B1.20.1)
- Related MSS standards
- SP-83 unions, SP-95 swages and bull plugs, SP-97 branch outlets, SP-79 inserts
- Sizes
- Butt-weld NPS 1/2 to 48; forged NPS 1/8 to 4
- Wall or class
- Butt-weld by schedule (5S to XXS); forged Class 2000, 3000, 6000, 9000
- Carbon and alloy steel
- ASTM A234 WPB, WPC, WP11, WP22; A420 WPL6; A105; A350 LF2
- Stainless and duplex
- ASTM A403 WP304/L, WP316/L; A815 S31803, S32205, S32750; A182 F304, F316, F51, F53
- Ends
- Bevel to ASME B16.25, socket weld, or NPT threaded

What we supply
- Butt-weld fittings
- 45, 90 and 180 degree elbows (long and short radius), equal and reducing tees, concentric and eccentric reducers, caps, stub ends
- Light-wall stainless
- MSS SP-43 fittings in Sch 5S and 10S for low-pressure corrosive and utility lines
- Forged fittings
- Socket weld and threaded elbows, tees, crosses, couplings, half couplings, caps, plugs and bushings
- Branch outlets
- MSS SP-97 weldolets, sockolets, threadolets, elbolets, latrolets and nipolets
- Swages and bull plugs
- MSS SP-95 concentric and eccentric swage nipples, hollow and solid bull plugs
- Unions
- MSS SP-83 Class 3000 and 6000 unions, socket weld and threaded
Pipe fitting types and the standard behind each
Each fitting type has one dimensional standard. Naming it on the RFQ fixes the shape, the length and how the pressure rating works.
| Fitting | Dimensional standard | Size range | Wall or class | Typical use |
|---|---|---|---|---|
| 90 and 45 degree elbow, long radius | ASME B16.9 | Within NPS 1/2 to 48 | Pipe schedule | Default change of direction |
| 90 degree elbow, short radius | ASME B16.9 (formerly B16.28) | By size table | Pipe schedule | Tight spaces, with stress engineer approval |
| 180 degree return | ASME B16.9 | By size table | Pipe schedule | Heater coils and U-turns |
| Equal and reducing tee | ASME B16.9 | Within NPS 1/2 to 48 | Pipe schedule | Branches near run size |
| Concentric and eccentric reducer | ASME B16.9 | Within NPS 1/2 to 48 | Pipe schedule at each end | Size change; eccentric at pump suction |
| Cap | ASME B16.9 | Within NPS 1/2 to 48 | Pipe schedule | Line ends and future tie-ins |
| Lap-joint stub end | ASME B16.9 long pattern; MSS SP-43 short pattern | By size table | Pipe schedule | With lap-joint flanges |
| Light-wall stainless fittings | MSS SP-43 | Sizes listed in ASME B36.19M | Sch 5S and 10S only | Low-pressure corrosive and utility service |
| Socket weld elbow, tee, cross, coupling, cap | ASME B16.11 | NPS 1/8 to 4 | Class 3000, 6000, 9000 | Small-bore process, vents and drains |
| Threaded elbow, tee, coupling, plug, bushing | ASME B16.11 | NPS 1/8 to 4 | Class 2000, 3000, 6000 | Utility, instrument and non-hazardous lines |
| Union | MSS SP-83 | Small bore, by NPS | Class 3000, 6000 | Break points for maintenance |
| Swage nipple and bull plug | MSS SP-95 | Swage NPS 1/4 to 12; bull plug NPS 1/8 to 12 | By wall thickness | Size change between small-bore and larger pipe |
| Branch outlet (olet) | MSS SP-97 | By maker; run and branch both specified | Matches run and branch walls | Branches well below run size |
Size ranges are the limits of each standard. Not every type is made at every size, and higher forged classes come only in smaller sizes. Confirm availability for large or heavy-wall items when you send the RFQ.
Fitting material grades by service
Choose the fitting grade that matches the pipe grade in your line class. The table pairs butt-weld and forged grades for common services.
| Service | Butt-weld fitting | Forged fitting | Matching pipe | Typical minimum properties |
|---|---|---|---|---|
| General carbon steel | ASTM A234 WPB | ASTM A105 | A106 Grade B | WPB: 240 MPa yield, 415 MPa tensile, 197 HBW max. A105: 250 MPa yield, 485 MPa tensile, 187 HBW max |
| Higher-strength carbon steel | ASTM A234 WPC | ASTM A105 | A106 Grade C | WPC: 275 MPa yield, 485 MPa tensile |
| Low temperature to -46 °C (-50 °F) | ASTM A420 WPL6 | ASTM A350 LF2 Class 1 | Low-temperature pipe per class | Charpy impact tested at -46 °C; WPL6 415 to 655 MPa tensile |
| 1 1/4Cr-1/2Mo | ASTM A234 WP11 | ASTM A182 F11 | A335 P11 | WP11 Class 1: 205 MPa yield, 415 MPa tensile |
| 2 1/4Cr-1Mo | ASTM A234 WP22 | ASTM A182 F22 | A335 P22 | WP22 Class 1: 205 MPa yield, 415 MPa tensile |
| Austenitic stainless | ASTM A403 WP304/304L, WP316/316L | ASTM A182 F304/304L, F316/316L | A312 TP304, TP316 and L grades | 304 and 316: 205 MPa yield, 515 MPa tensile. L grades: 170 MPa yield, 485 MPa tensile |
| 22Cr duplex | ASTM A815 S31803 or S32205 | ASTM A182 F51 | A790 S31803 | S31803: 450 MPa yield, 620 MPa tensile, 293 HBW max |
| 25Cr super duplex | ASTM A815 S32750 | ASTM A182 F53 | A790 S32750 | S32750: 550 MPa yield, 800 MPa (116 ksi) minimum tensile, 310 HBW max |
Typical minimums summarised from published grade data; confirm every value against the edition named in your purchase order. Temperature limits come from the design code and your line class, not from the material specification alone.
Saudi Arabia requirements for pipe fittings
Saudi Aramco limits fitting types and sizes in SAES-L-110 and sets PMI rules in SAES-A-206. The points below come from unofficial copies; your project specification governs.
| Requirement | What it means |
|---|---|
| Forged fitting class | In hazardous service, threaded and socket weld fittings are ASME B16.11 Class 3000, Class 6000 or higher (SAES-L-110, 11.1). |
| Socket weld size | Socket welds are limited to 1 1/2 in. in hazardous service for new work. In sour service they are avoided, and limited to 1 in. where unavoidable. |
| Vibration | No socket weld joints where high vibration can occur, for example at reciprocating pumps. |
| Socket weld gap | Axial gap before welding of 1.5 mm minimum and 3 mm maximum, per ASME B31.3 Figure 328.5.2C. |
| Threaded joints | NPT threads to ASME B1.20.1, 1 1/2 in. maximum in hazardous service. Joints are seal welded up to the first block valve in hydrocarbon and toxic lines. No PTFE tape above 204 °C. |
| Unions and branch outlets | Unions are Class 3000 to MSS SP-83. Integrally reinforced outlets are Class 3000 or higher with full penetration welds. |
| Butt-weld fittings | Carbon steel butt-weld fittings (A234 WPB, MSS SP-75) conform to 02-SAMSS-005. Miter elbows and crosses are not used without approval. |
| PMI | SAES-A-206 calls for 100% PMI on alloy pressure components; carbon steel is exempt unless specified, for example in wet sour service. Verified items are stamped PMI. |
| Coastal storage | Plants in Jubail Industrial City, Ras Al Khair and Ras Tanura sit beside the sea. Keep fittings capped, off the sand and under cover, and store stainless away from carbon steel and chloride dust. |
Based on an unofficial copy of SAES-L-110 (11 July 2012) and an unofficial copy of SAES-A-206 (3 July 2007), which may be superseded; confirm against the current revision in your project specification. SAES-L-110 also refers carbon steel butt-weld fittings to 02-SAMSS-005; quote that specification on your RFQ if your project invokes it.
Where pipe fittings are used
Every piping system needs fittings. The type and grade follow the line class for each service.
Process and utility piping
B16.9 elbows, tees and reducers in WPB for hydrocarbon, water and air lines.
Pumps and compressors
Eccentric reducers at pump suction and concentric reducers at discharge nozzles.
Corrosive and seawater service
A403 316L and A815 duplex fittings for chloride and chemical service.
Vents, drains and instruments
B16.11 forged fittings, swages and nipolets on small-bore connections.
Tie-ins and branches
Weldolets and sockolets for branches well below run size.
Shutdowns and turnarounds
Fittings listed per isometric, tagged and packed with their certificates.
Checked in Al Jubail before dispatch
We compare every fitting with its certificate and your order before it leaves.
- Heat number traced to the 3.1 MTC
- Grade, schedule and size marking
- Bevel and end type check
- Third-party inspection on request
- PMI by your inspector on request
One order for the whole joint
Fittings arrive with the flanges, bolting and gaskets that complete each joint.
- Weld neck and socket weld flanges
- Stud bolts and nuts
- Spiral wound and RTJ gaskets
- Valves for the same class
Butt-weld, socket weld or threaded: how fittings join the pipe
The joint type decides the fitting standard. Butt-weld fittings are welded end to end with the pipe through the full wall. Socket weld fittings take the pipe inside a socket and are fillet welded on the outside. Threaded fittings screw onto tapered pipe threads.
Butt welds give the strongest joint and allow full radiography. Socket welds are quicker to fit up on small bore lines. Threaded joints need no welding but can leak under vibration and thermal cycling.
Most line classes use butt-weld fittings from NPS 2 upward and forged socket weld fittings at NPS 1 1/2 and below. Threaded fittings are kept for utility and instrument lines, or seal welded where the class allows them in process service.
| Point | Butt-weld (ASME B16.9) | Socket weld (ASME B16.11) | Threaded (ASME B16.11) |
|---|---|---|---|
| Usual size | NPS 2 and larger | NPS 1 1/2 and smaller in most classes | NPS 1 1/2 and smaller |
| Rating basis | Same as matching seamless pipe | Class 3000, 6000 or 9000 | Class 2000, 3000 or 6000 |
| Weld inspection | Full radiography or UT possible | Surface methods (MT or PT) on the fillet | None, unless seal welded |
| Crevice | None; smooth bore | Small gap at socket bottom | Thread roots |
| Leak risk | Lowest | Low | Highest under vibration |
| Fit-up skill | Bevel, root gap, alignment | 1.6 mm pull-back before welding | Thread engagement and sealant |
Size limits are set by your line class. Saudi Aramco SAES-L-110 limits socket weld and threaded joints to 1 1/2 in. in hazardous service. Based on an unofficial copy of SAES-L-110 (11 July 2012), which may be superseded; confirm against the current revision in your project specification.
Butt-weld pipe fittings to ASME B16.9 and MSS SP-43
ASME B16.9 covers factory-made wrought steel butt-weld fittings from NPS 1/2 to 48. It sets the dimensions, tolerances and marking for each fitting type. The pressure rating is the same as straight seamless pipe of the same material and wall.
That rating rule matters when you order. A WPB elbow in Schedule 80 is rated like A106 Grade B pipe in Schedule 80. So the schedule on the RFQ must match the pipe, not just the nominal size.
Elbows: long radius, short radius and returns
A long radius (LR) elbow has a centerline radius of 1.5 times the NPS. A short radius (SR) elbow has a radius of 1.0 times the NPS. At NPS 6, that is 9 in. against 6 in.
SR elbows save space but have a higher stress intensification factor and more pressure drop. Use LR unless the line class or the stress engineer allows SR. Short radius elbows were once a separate standard, ASME B16.28; current B16.9 now generally covers them, but older specifications may still cite B16.28.
Elbows come in 45, 90 and 180 degree forms. A 180 degree return turns the flow back on itself, as in heater coils.
Tees, reducers, caps and stub ends
An equal tee has all three ends the same size. A reducing tee has a smaller branch, for example 6 x 6 x 4. Order reducing tees by run, run and branch size, in that order.
Concentric reducers keep the centerline. Eccentric reducers keep one side flat. Eccentric reducers are fitted flat side up at pump suctions so no vapor pocket forms.
Caps close a line end. Stub ends work with lap-joint flanges, so the flange can rotate and can be a cheaper grade than the wetted stub end. B16.9 gives long pattern stub ends; MSS SP-43 gives short pattern ones.
MSS SP-43 light-wall stainless fittings
MSS SP-43 covers wrought and fabricated stainless butt-weld fittings for low-pressure, corrosion-resistant service. It covers Sch 5S and 10S only, with short pattern stub ends also shown for 40S.
SP-43 fittings are not pressure rated the way B16.9 fittings are. They must withstand 30% of the allowable rating of the matching pipe. Where full pipe rating is needed, order B16.9 fittings instead. SP-43 fittings are marked CR with the material symbol.
| NPS | Long radius 90 (1.5 x NPS) | Short radius 90 (1.0 x NPS) | Long radius 180 return, center to center (3 x NPS) |
|---|---|---|---|
| 1 | 1.5 in. (38 mm) | 1 in. (25 mm) | 3 in. (76 mm) |
| 2 | 3 in. (76 mm) | 2 in. (51 mm) | 6 in. (152 mm) |
| 3 | 4.5 in. (114 mm) | 3 in. (76 mm) | 9 in. (229 mm) |
| 4 | 6 in. (152 mm) | 4 in. (102 mm) | 12 in. (305 mm) |
| 6 | 9 in. (229 mm) | 6 in. (152 mm) | 18 in. (457 mm) |
| 8 | 12 in. (305 mm) | 8 in. (203 mm) | 24 in. (610 mm) |
| 10 | 15 in. (381 mm) | 10 in. (254 mm) | 30 in. (762 mm) |
| 12 | 18 in. (457 mm) | 12 in. (305 mm) | 36 in. (914 mm) |
| 24 | 36 in. (914 mm) | 24 in. (610 mm) | 72 in. (1829 mm) |
Worked from the 1.5 x NPS and 1.0 x NPS radius rule for layout checks. NPS 1/2 and 3/4 do not follow the rule. Confirm final dimensions and tolerances on the ASME B16.9 tables before fabrication.
Forged socket weld and threaded fittings to ASME B16.11
ASME B16.11 covers forged socket weld and threaded fittings from NPS 1/8 to 4 (DN 6 to 100). Socket weld fittings come in Class 3000, 6000 and 9000. Threaded fittings come in Class 2000, 3000 and 6000.
The class number is not a flange class and is not a pressure in psi. It names a fitting body wall that matches a pipe schedule. The table below shows the pairing used for rating calculations.
Higher classes are made only in smaller sizes. Typically, Class 6000 and 9000 socket weld fittings stop at NPS 2. Check the size-by-class table in B16.11 for each type.
Types covered by B16.11
B16.11 covers these forged shapes:
- 90 and 45 degree elbows, and threaded street elbows
- Equal tees and crosses, with reducing outlets designated by a set method
- Full couplings, half couplings and reducing couplings
- Caps for socket weld and threaded ends
- Hex, square and round head plugs, and hex and flush bushings (threaded)
- Bosses and couplets for branch take-offs
What B16.11 does not cover
Unions are in MSS SP-83, not B16.11. Swage nipples and bull plugs are in MSS SP-95. Socket weld reducer inserts are in MSS SP-79. Integrally reinforced branch outlets are in MSS SP-97.
B16.11 has no straight forged reducer. To reduce on a small-bore line, use a swage nipple, a reducing coupling, a reducer insert or a B16.9 reducer.
Fitting up a socket weld
Push the pipe into the socket, then pull it back about 1/16 in. (1.6 mm) before welding. The gap lets the pipe expand without cracking the fillet weld. Saudi Aramco SAES-L-110 sets the gap at 1.5 mm minimum and 3 mm maximum. Based on an unofficial copy of SAES-L-110 (11 July 2012), which may be superseded; confirm against the current revision in your project specification.
| Class | End type | Pipe schedule | Wall designation |
|---|---|---|---|
| 2000 | Threaded | 80 | XS |
| 3000 | Threaded | 160 | – |
| 6000 | Threaded | – | XXS |
| 3000 | Socket weld | 80 | XS |
| 6000 | Socket weld | 160 | – |
| 9000 | Socket weld | – | XXS |
The pairing does not stop you using thinner or thicker pipe. With thinner pipe, the pipe may govern the rating; with thicker pipe, the fitting governs.
Unions, swages and branch outlets (MSS SP-83, SP-95, SP-97)
Small-bore piping uses several fittings beyond B16.11. Each has its own MSS standard, and each needs its own line on an RFQ.
Unions to MSS SP-83
MSS SP-83 covers Class 3000 and 6000 pipe unions with socket weld or threaded ends. It covers forged carbon steel, alloy steel, stainless and nickel alloy. Unions let you break a line for maintenance without cutting it. Some line classes ban unions between the main run and the root valve.
Swage nipples and bull plugs to MSS SP-95
A swage nipple is a male-ended reducing fitting, concentric or eccentric. SP-95 covers swage nipples from NPS 1/4 to 12 and bull plugs from NPS 1/8 to 12. Bull plugs are hollow or solid male closures.
Each end can be threaded, beveled, square cut or grooved. Order swages by large end and small end, with the schedule and end type for each. They are rated as straight seamless pipe of the same wall.
Integrally reinforced branch outlets to MSS SP-97
Branch outlets, often called olets, are welded onto a run pipe over a hole. Their extra body metal replaces the metal cut from the run, so no reinforcing pad is needed.
The common names describe the outlet end:
- Weldolet: butt-weld outlet, beveled to the branch pipe wall
- Sockolet: socket weld outlet, Class 3000, 6000 or 9000
- Threadolet: female NPT outlet, Class 3000 or 6000
- Elbolet: fits on a long radius elbow, often for thermowells
- Latrolet: 45 degree lateral branch
- Nipolet: one-piece outlet with a male end for vents, drains and valve take-offs
Specifying an olet correctly
Give the run size and wall, and the branch size and wall. The reinforcement depends on the run wall, and the outlet bevel must match the branch pipe.
Schedule 40 and STD differ above NPS 10. Schedule 80 and XS differ above NPS 8. So an 18 in. Sch 80 run needs a heavier outlet than the branch size alone suggests.
Pipe fitting materials: matching the grade to the pipe
The fitting grade should match the pipe grade in chemistry, strength and toughness. A mismatch can fail impact or hardness rules, or give the wrong weld procedure. Your line class usually names both.
Butt-weld fitting grades
ASTM A234 covers wrought carbon and alloy steel fittings, seamless and welded. WPB is the usual grade with A106 Grade B pipe. WP11 and WP22 are Cr-Mo grades for high-temperature service, used with A335 P11 and P22.
ASTM A420 covers low-temperature fittings. WPL6 is impact tested at -46 °C (-50 °F). WPB is typically used down to about -29 °C. Supplying WPB where WPL6 is specified is a non-conformance.
ASTM A403 covers austenitic stainless fittings, such as WP304, WP304L, WP316 and WP316L. ASTM A815 covers ferritic, duplex and martensitic stainless fittings, such as S31803, S32205 and S32750.
Construction class: WP-S, WP-W, WP-WX, WP-WU and CR
A403 and A815 split WP fittings by construction. The suffix tells you how the fitting was made and examined:
- WP-S: made from seamless product by a seamless method
- WP-W: contains welds; fabrication welds made with filler metal are radiographed
- WP-WX: all welds radiographed
- WP-WU: all welds ultrasonically tested
- CR: made to MSS SP-43 light-wall dimensions
Forged fitting grades
ASTM A105 is the forged carbon steel grade, with a 485 MPa tensile and 250 MPa yield minimum. Heat treatment is optional for small forgings, but many project specifications require normalizing.
ASTM A350 LF2 Class 1 is the low-temperature forging, impact tested at -46 °C (-50 °F). ASTM A182 covers alloy and stainless forgings: F11 and F22 Cr-Mo, F304 and F316 austenitic, F51 22Cr duplex and F53 25Cr super duplex.
Welded fittings and the W suffix
Large carbon steel fittings are often made from welded pipe or plate. A234 and A420 mark welded construction with a W after the grade, such as WPBW or WPL6W. Check whether your line class accepts welded fittings and what NDE it requires on the seam.
Wall thickness, schedules and ASME B16.25 end bevels
A butt-weld fitting is ordered by the same schedule as its pipe. Carbon steel schedules follow ASME B36.10M and stainless schedules follow ASME B36.19M. The S suffix, as in 10S or 40S, marks the stainless series.
STD and Schedule 40 are the same only up to NPS 10. XS and Schedule 80 are the same only up to NPS 8. Above those sizes, state the wall in millimeters or the exact schedule.
Fitting walls carry a minus tolerance. A typical rule is not less than 87.5% of nominal wall at any point. Allow for it when wall thickness is tight against corrosion allowance.
End bevel to ASME B16.25
ASME B16.25 sets the weld end of butt-weld fittings. Walls over 3 mm to 22 mm take a single V bevel of 37.5 degrees. The root face is 1.6 mm, plus or minus 0.8 mm. Walls over 22 mm take a compound bevel with a shallower 10 degree outer face. Thin walls of 3 mm and below may be square cut.
Where the fitting and pipe walls differ, the thicker end is tapered to the thinner one. B16.25 gives the transition contours. State on the RFQ if you need a special bevel for a GTAW root or an automatic welding process.
| Wall thickness | Weld end | Detail |
|---|---|---|
| 3 mm (0.12 in.) and below | Square cut or slight chamfer | Per maker or WPS |
| Over 3 mm to 22 mm (0.88 in.) | Single V bevel | 37.5 degrees nominal, 1.6 mm root face |
| Over 22 mm (0.88 in.) | Compound bevel | 37.5 degrees near the root, 10 degrees outer face |
| Special processes | GTAW root or J bevel | Separate B16.25 figures; state on the order |
Bevel angle tolerances are given in B16.25 and in your WPS. Confirm the edition named in the purchase order.
Sour service, hardness and PMI for pipe fittings
Fittings in wet H2S service must meet NACE MR0175/ISO 15156. The standard applies when H2S partial pressure reaches 0.3 kPa (0.05 psia) or more. Refinery lines may instead cite NACE MR0103.
For carbon steel, the key rule is a hardness limit of 22 HRC, applied to base metal, weld metal and heat-affected zone. Cold-formed fittings and fittings with welded seams need attention, because forming and welding can raise hardness.
What to ask for in sour service
- A statement of compliance with NACE MR0175/ISO 15156 on the certificate
- Hardness test results for each heat or lot, and for any seam weld
- Heat treatment condition, such as normalized, stated on the MTC
- For welded fittings, the weld procedure hardness survey
- For duplex and stainless, the ISO 15156-3 limits that apply to your environment
Positive material identification (PMI)
PMI checks alloy content on the part itself, usually by X-ray fluorescence. API RP 578 describes material verification programs for alloy piping. Mix-ups between carbon steel and Cr-Mo fittings look identical but fail in service.
Saudi Aramco SAES-A-206 calls for 100% PMI on alloy pressure components, with carbon steel exempt unless specified. Based on an unofficial copy of SAES-A-206 (3 July 2007), which may be superseded; confirm against the current revision in your project specification. PMI does not replace the mill test certificate. We arrange PMI by your inspector or a third party on request.
Pressure rating and hydrotest: how fittings relate to the line test
Butt-weld fittings are not hydrotested one by one as a rule. The material specifications state that each fitting must withstand the test pressure of the matching pipe. B16.9 fittings prove their design by calculation or proof test, not by a test on every piece.
The real pressure test happens after erection. ASME B31.3 sets the hydrotest at 1.5 times design pressure, corrected for the ratio of allowable stresses at test and design temperature. The minimum hold is 10 minutes, and many project specifications ask for longer.
So the fitting must match the pipe wall to survive the line test. A Sch 40 tee in a Sch 80 line becomes the weak point. Forged fittings work the same way through the class-to-schedule pairing.
When to order a shop hydrotest
Some line classes or clients ask for a hydrotest on fabricated or welded fittings. If you need one, state the test pressure, hold time and witness requirement on the RFQ. The cost and lead time depend on the size and number of pieces.
MSS SP-43 fittings differ. They are not pressure rated and must withstand 30% of the matching pipe rating, so check them against the line test pressure before installation.
How to specify pipe fittings on an RFQ
A complete fitting line has seven parts. Missing any of them leads to a query or a wrong item.
Example RFQ lines
- Elbow 90 LR, NPS 6, Sch 40, BW bevel to B16.25, ASME B16.9, ASTM A234 WPB seamless, 3.1 MTC
- Tee reducing, NPS 8 x 8 x 4, Sch 80, BW, ASME B16.9, ASTM A420 WPL6, NACE MR0175/ISO 15156
- Reducer eccentric, NPS 6 x 4, Sch 10S, BW, ASME B16.9, ASTM A403 WP316L-S
- Coupling full, NPS 1, Class 3000, socket weld, ASME B16.11, ASTM A105, normalized
- Swage nipple concentric, NPS 2 x 1, Sch 80 x Sch 160, BLE x TSE, MSS SP-95, ASTM A105
- Weldolet, run NPS 12 STD x branch NPS 2 Sch 80, MSS SP-97, ASTM A105
Abbreviations buyers meet
- BW: butt weld; SW: socket weld; THD or NPT: threaded
- LR and SR: long radius and short radius
- BLE, PLE, TLE: beveled, plain or threaded large end (swages)
- BSE, TSE: beveled or threaded small end (swages)
- MTC: mill test certificate; PMI: positive material identification
- Fitting type and angle: for example 90 degree LR elbow, reducing tee, eccentric reducer, Class 3000 socket weld coupling.
- Size: NPS for each end, run first then branch for tees, large end first for reducers and swages.
- Wall: schedule or wall in millimeters for butt-weld fittings; class for forged fittings.
- End type: bevel to B16.25, socket weld, or NPT threaded; for swages, each end separately.
- Dimensional standard: ASME B16.9, B16.11, MSS SP-43, SP-83, SP-95 or SP-97.
- Material: ASTM specification, grade and construction class, such as A234 WPB-S or A403 WP316L-W.
- Extras: NACE MR0175/ISO 15156, impact testing, PMI, hydrotest, third-party inspection, and EN 10204 3.1 or 3.2 certificates.
Receiving inspection and common mistakes
Check fittings on arrival against the order, the marking and the certificate. Most problems show up in these checks, before any weld is made.
Receiving checklist
- Marking per MSS SP-25: maker, material grade, schedule or class, size and heat number
- Heat number on the fitting matches the heat on the 3.1 MTC
- Wall at the bevel matches the pipe schedule; check with a gauge
- Bevel angle and root face are clean and undamaged
- Socket bore and depth, or thread form, are clean and free of burrs
- Surface free of laps, cracks and deep grinding
- Stainless kept apart from carbon steel tools and racks
- Bevel protectors and end caps in place until fit-up
Common mistakes
- Ordering by NPS alone, without the schedule or class
- Assuming STD equals Sch 40, or XS equals Sch 80, above NPS 10 or NPS 8
- Swapping a short radius elbow for a long radius one without stress review
- Using WPB where the line class calls for WPL6 in cold service
- Mixing MSS SP-43 light-wall fittings into a B16.9 full-rating line
- Reading B16.11 class numbers as flange classes or psi ratings
- Ordering an olet by branch size only, without the run size and wall
- Leaving out NACE, impact or PMI requirements that the line class sets
Pipe fitting questions
What is the difference between ASME B16.9 and B16.11 fittings?
ASME B16.9 covers wrought butt-weld fittings from NPS 1/2 to 48, rated the same as matching seamless pipe. ASME B16.11 covers forged socket weld and threaded fittings from NPS 1/8 to 4, rated by class. Socket weld fittings are Class 3000, 6000 and 9000; threaded fittings are Class 2000, 3000 and 6000. Most line classes use B16.9 from NPS 2 upward and B16.11 for small bore.
What does Class 3000 mean on a forged fitting?
Class 3000 is a B16.11 rating designation, not a pressure in psi and not a flange class. A Class 3000 socket weld fitting matches Schedule 80 pipe for rating calculations. A Class 3000 threaded fitting matches Schedule 160, because the thread removes wall. With thinner pipe, the pipe may govern the rating; with thicker pipe, the fitting governs.
When should I use a long radius or a short radius elbow?
Use long radius elbows by default. Their centerline radius is 1.5 times the NPS. Short radius elbows, at 1.0 times the NPS, save space but have a higher stress intensification factor and more pressure drop. Use them only where the line class allows and the piping stress engineer has checked the change.
Which fitting grade matches A106 Grade B pipe?
ASTM A234 WPB for butt-weld fittings and ASTM A105 for forged fittings. Both are carbon steel. WPB has a 240 MPa yield and 415 MPa tensile minimum, and A105 has 250 MPa and 485 MPa. For cold service below about -29 °C, the line class normally moves to A420 WPL6 and A350 LF2 instead.
What is the difference between WPB and WPL6?
Both have similar chemistry and the same minimum strength, 240 MPa yield and 415 MPa tensile. WPL6 is made under ASTM A420 and is Charpy impact tested at -46 °C (-50 °F), usually after normalizing. WPB under ASTM A234 has no mandatory impact test. Using WPB where WPL6 is specified is a non-conformance.
What do WP-S, WP-W and WP-WX mean on stainless fittings?
They are construction classes in ASTM A403 and A815. WP-S is made from seamless product. WP-W contains welds, with filler-metal fabrication welds radiographed. WP-WX has all welds radiographed, and WP-WU has all welds ultrasonically tested. CR fittings are made to MSS SP-43 light-wall dimensions. Your line class says which classes it accepts.
Are MSS SP-43 fittings the same as B16.9 stainless fittings?
No. MSS SP-43 covers light-wall stainless fittings for Sch 5S and 10S only, for low-pressure corrosion-resistant service. They are not pressure rated like B16.9 fittings and must withstand 30% of the matching pipe rating. If your line needs full pipe rating, order B16.9 fittings in the same schedule.
Are pipe fittings hydrotested before delivery?
Not as a rule. The material specifications require each fitting to withstand the test pressure of the matching pipe, but they do not require testing every piece. The system is then hydrotested after erection, normally at 1.5 times design pressure under ASME B31.3. If your project needs a shop hydrotest, state the pressure and witness point on the order.
What is the B16.25 bevel for butt-weld fittings?
For walls over 3 mm up to 22 mm, ASME B16.25 gives a 37.5 degree single V bevel. The root face is 1.6 mm. Walls over 22 mm take a compound bevel with a 10 degree outer face. Thin walls may be square cut. Special bevels for GTAW roots are separate figures in the standard.
Can socket weld fittings be used in sour service?
Many owners restrict them. Saudi Aramco SAES-L-110 says socket welds should be avoided in sour service and, if unavoidable, limited to 1 in. Based on an unofficial copy of SAES-L-110 (11 July 2012), which may be superseded; confirm against the current revision in your project specification. The crevice at the socket bottom and the fillet weld are the concerns. Check your line class and order NACE MR0175/ISO 15156 compliant material either way.
What hardness limit applies to carbon steel fittings in sour service?
NACE MR0175/ISO 15156-2 limits carbon steel to 22 HRC. The limit covers the base metal, weld metal and heat-affected zone of welded fittings. Ask for hardness results on the certificate, the heat treatment condition, and a compliance statement. Refinery projects may cite NACE MR0103 instead, which has its own rules.
How do I order a weldolet?
Give the run pipe size and wall, then the branch size and wall. For example: run NPS 12 STD by branch NPS 2 Sch 80, MSS SP-97, ASTM A105. The run wall sets the reinforcement and the branch wall sets the bevel. Ordering by branch size alone can give an outlet that is too light for a heavy run.
Do you manufacture pipe fittings?
No. JTE supplies pipe fittings sourced from established manufacturers. We check marking, dimensions and certificates in Al Jubail before dispatch and arrange third-party inspection on request. Our factory in Al Jubail cuts, threads and bends fasteners, so we can supply the stud bolts for the same joints.
What certificates come with the fittings?
Fittings come with EN 10204 3.1 mill test certificates showing chemistry, mechanical results, heat treatment and heat number. Where your project calls for EN 10204 3.2, a third-party inspector witnesses the tests and countersigns. NACE, impact test and PMI results are added when the order requires them.
Updated
Related
Flanges
Weld neck, socket weld and blind flanges that complete the joint.
Industrial valves
Gate, globe, check and ball valves for the same piping classes.
Gaskets and rings
Spiral wound, RTJ and sheet gaskets for flanged joints.
Send your pipe fitting list
Type, size, schedule or class, end, standard and grade per line is enough. We quote projects across the Eastern Province, from Al Jubail to Dammam.