+966 54 614 8678 [email protected] WhatsApp
JTE FastenersBolting & hardware, Al Jubail العربية Request a quote

Lifting and rigging hardware with proof-load certificates

Forged shackles, turnbuckles, wire rope clips, thimbles, lifting eye bolts, eye nuts and swivel hoist rings from recognised rigging manufacturers, each marked with its working load limit and supplied with test certificates from Al Jubail.

Rigging hardware connects slings, wire rope and loads, so every piece must be forged or manufactured for lifting, marked with its working load limit and backed by a test certificate. Unlike ordinary fasteners, lifting hardware is never made up from bolts, rods or pins. JTE supplies certified rigging hardware from established manufacturers, traceable to individual proof-load certificates, alongside the industrial bolting we make in Al Jubail.

Shackles
Bow and D shackles, screw pin and bolt-nut-cotter types, Grade 6 (6:1) to EN 13889 or US federal RR-C-271
Turnbuckles
Jaw, eye and hook ends to ASTM F1145, hot-dip galvanized
Wire rope fittings
Forged wire rope clips and thimbles
Lifting points
Eye bolts and eye nuts (DIN 580 / 582, ISO 3266), swivel hoist rings
Design factor
Minimum 5:1 for all rigging hardware; 6:1 on Grade 6 shackles
Documents
Manufacturer’s certificate with serial or batch number, WLL, design factor and proof-load test

What each item is for

Shackles
Connecting slings, chain and wire rope to loads and hooks
Turnbuckles
Tensioning guys, braces and stays
Wire rope clips and thimbles
Making eye terminations in wire rope for static guys
Eye bolts and eye nuts
Fixed lifting points on equipment, loaded in the plane of the eye
Swivel hoist rings
Lifting points that rotate and pivot to follow the sling angle

Ropes, slings and hoists to go with this hardware: Wire rope, slings and chain blocks.

Ratings and markings by item

Each type of rigging hardware has its own design factor and proof test. The marking must stay legible for the life of the item, and an item with missing marks is taken out of service.

Typical ratings for forged rigging hardware
ItemDesign factorProof testRequired marking
Grade 6 shackles6:1 (minimum breaking load 6 x WLL)2 x WLLManufacturer, size and WLL on the body; grade or rating on the pin
Turnbuckles5:12.5 x WLLManufacturer and size or rated load
Swivel hoist rings5:12.5 x WLL, each pieceManufacturer, rated load and tightening torque
Eye bolts and eye nutsPer standardPer standardManufacturer and WLL; reduced load when pulled off-axis
Wire rope clipsTermination efficiency 80% to 90% of rope strength–Manufacturer and size on the saddle

Ratings from manufacturers’ published data (forged Grade 6 shackles, turnbuckles to ASTM F1145, swivel hoist rings) and ASME B30.26 marking rules. Always use the WLL on the item and its certificate.

Eye bolts and eye nutsU-bolts

Saudi Arabia requirements for rigging hardware

Lifting on Saudi Aramco sites is governed by its rigging hardware General Instruction and Construction Safety Manual, and lifting equipment sold in the Kingdom falls under SASO’s lifting equipment technical regulation.

Rigging hardware in Saudi projects
RequirementWhat it means for the order
Saudi Aramco GI 7.029, design factorAll rigging hardware needs a minimum 5:1 design factor.
GI 7.029, certificatesCertificates show individual serial numbers, the design factor and a proof-load test of at least 200% of the working load limit.
GI 7.029, in-house hardwareFittings made in-house from bolts, rods or pins are not allowed. We supply only manufactured, marked rigging hardware.
InspectionRigging hardware is inspected before each use by a Saudi Aramco certified rigger and periodically, so marked and certified items are essential.
SASO lifting equipment regulationLifting fittings sold in Saudi Arabia need a SASO certificate of conformity and must be marked with the working load limit, with Arabic text where required.
Vendor statusJTE Fasteners is ISO 9001 certified and registered as an approved vendor with Saudi Aramco and SABIC.

Summarised from Saudi Aramco GI 7.029 and the SASO Technical Regulation for Machinery Safety, Part 3: Lifting Equipment. Check the current revision used on your site.

Where rigging hardware is used

Shutdowns, construction and maintenance all depend on certified lifting gear.

Shutdowns and turnarounds

Shackles and hoist rings for lifting exchanger bundles, valves and spools.

Equipment lifting points

Eye bolts and hoist rings on pumps, motors and skids.

Steel erection

Shackles and turnbuckles for erecting and plumbing structures.

Marine and offshore

Galvanized shackles and fittings for jetties and offshore platforms.

Guying and bracing

Turnbuckles, clips and thimbles on guy wires and temporary bracing.

Rigging lofts

Restocking site rigging stores with certified items.

Using rigging hardware safely

The certificate only holds if the item is used as intended.

  • Never exceed the marked WLL
  • Load eye bolts in the plane of the eye
  • Reduce eye bolt loads for angled pulls
  • Tighten wire rope clips to the maker’s torque and re-check
  • Remove items with missing marks or damage

Eye bolts and eye nuts

Documents with every order

Every item can be traced from its marking to its certificate.

  • Manufacturer’s test certificate
  • Serial or batch number
  • WLL and design factor
  • Proof-load test result
  • Declaration of conformity

Quality and certificates

Rigging hardware questions

What design factor does Saudi Aramco require for rigging hardware?

Saudi Aramco GI 7.029 requires a minimum 5:1 design factor for all rigging hardware, with certificates showing serial numbers and a proof-load test of at least 200% of the working load limit.

What is the difference between Grade 6 shackles and other shackles?

Grade 6 forged shackles, as in EN 13889, have a minimum breaking load of six times the working load limit and are proof tested to twice the WLL. The WLL and grade are marked on every shackle.

Can I make a lifting eye from a bolt or rod?

No. Saudi Aramco does not allow rigging fittings made in-house from bolts, rods or pins. Lifting points must be manufactured, marked and certified items such as DIN 580 eye bolts or swivel hoist rings.

Why is an eye bolt rated lower for an angled lift?

An eye bolt is strongest when pulled along its axis. Pulled at an angle it bends, so manufacturers publish a reduced load, roughly half the axial rating at 90 degrees for DIN 580 eye bolts. Swivel hoist rings are used where the sling angle varies.

Does rigging hardware need SASO certification?

Lifting fittings such as shackles and hooks are covered by SASO’s lifting equipment technical regulation, which requires a SASO certificate of conformity and marking of the working load limit.

Do you supply certificates with rigging hardware?

Yes. Every item comes with the manufacturer’s certificate showing the serial or batch number, working load limit, design factor and proof-load test.

Updated

Related

Eye bolts and eye nuts

DIN 580 eye bolts and DIN 582 eye nuts.

Shutdown bolting kits

Bolting and hardware packed for turnarounds.

Pipe supports and hangers

Clamps, U-bolts, rods and hangers.

Need certified rigging hardware?

Send the item list with working load limits: we quote certified hardware with test certificates.

Request a quote+966 54 614 8678