+966 54 614 8678 [email protected] WhatsApp
JTE FastenersBolting & hardware, Al Jubail العربية Request a quote

Steel hardness conversion chart: Rockwell, Brinell and Vickers

Approximate conversions between Rockwell C, Brinell, Vickers and Rockwell B for steel, with tensile strength and the hardness limits that matter for bolting.

For steel, 22 HRC is about 237 HB and 248 HV, 35 HRC is about 327 HB, and 38 HRC is about 353 HB. These conversions, from ASTM E140, are approximate: always test with the method the specification names. The 22 HRC line is the one that matters most in Saudi plants, because NACE MR0175 / ISO 15156 limits sour-service bolting such as B7M, 2HM, L7M and 7M to that hardness.

Conversion table for steel

Approximate hardness conversions for non-austenitic steel (ASTM E140)
Rockwell C (HRC)Vickers (HV)Brinell (HB, 3000 kgf)Rockwell B (HRB)Approx. tensile strength
2023822697.8760 MPa (110 ksi)
2124323198.5770 MPa (112 ksi)
2224823799.0785 MPa (114 ksi)
23254243100.0805 MPa (117 ksi)
24260247(101.0)825 MPa (120 ksi)
25266253(101.5)840 MPa (122 ksi)
26272258(102.5)860 MPa (125 ksi)
27279264(103.0)880 MPa (128 ksi)
28286271(104.0)910 MPa (132 ksi)
29294279(104.5)930 MPa (135 ksi)
30302286(105.5)950 MPa (138 ksi)
31310294(106.0)980 MPa (142 ksi)
32318301(107.0)1000 MPa (145 ksi)
33327311(107.5)1025 MPa (149 ksi)
34336319(108.0)1055 MPa (153 ksi)
35345327(108.5)1080 MPa (157 ksi)
36354336(109.0)1115 MPa (162 ksi)
37363344–1160 MPa (168 ksi)
38372353–1180 MPa (171 ksi)
39382362–1215 MPa (176 ksi)
40392371–1250 MPa (181 ksi)
42412390–1340 MPa (194 ksi)
44434409–1435 MPa (208 ksi)
46458432–1530 MPa (222 ksi)
48484451–1635 MPa (237 ksi)
50513(475)–1760 MPa (255 ksi)

Values in brackets are outside the normal range of that scale and are for reference only. Conversions do not apply to austenitic stainless steel such as B8 and B8M. Source: ASTM E140 table as published by Miki Pulley.

Hardness limits that matter for bolting

Fastener hardness limits
ItemLimitWhy
Sour-service carbon and low-alloy steel22 HRC (about 237 HB) maximumNACE MR0175 / ISO 15156 limit against sulfide stress cracking
A193 B7M studs235 HB maximumHardness-limited version of B7
A194 2HM and 7M nuts159–237 HBSour and cold sour service nuts
A193 B7 studs35 HRC (321 HB) maximumGeneral service studs
A194 2H, Grade 4 and Grade 7 nuts24–38 HRCStandard heat-treated flange nuts

Hardness conversion questions

What is 22 HRC in Brinell?

About 237 HB (and 248 HV) on the ASTM E140 conversion for steel. It is the NACE MR0175 / ISO 15156 limit for sour-service carbon and low-alloy steel.

What is 35 HRC in Brinell?

About 327 HB on the ASTM E140 table. ASTM A193 B7 studs are limited to 35 HRC (321 HB).

Are hardness conversions exact?

No. ASTM E140 conversions are approximate and depend on the material. Acceptance should be based on the scale and method the specification names.

Can I convert hardness to tensile strength?

Only approximately, for carbon and low-alloy steel. Use the conversion as a check, not as a substitute for a tensile test.

Do these conversions work for stainless steel?

Not for austenitic stainless steel such as 304 and 316 (B8 and B8M), which needs its own conversion tables.

Updated

Related

ASTM A194 nut grades

Hardness ranges for 2H, 2HM, 7 and 7M nuts.

B7 vs B7M

Why sour service needs hardness-limited bolting.

MTC 3.1 vs 3.2

Where hardness results are reported.

Need hardness-tested bolting?

We supply B7M, 2HM and 7M with hardness results on the certificate.

Request a quote+966 54 614 8678