ASTM A563 nuts for structural and general bolts
Carbon and alloy steel nuts in Grades A, C, DH and DH3 for A307, A325 and A490 bolts, plain or galvanized (DH nuts overtapped and lubricated for galvanized bolts), supplied as part of complete structural bolt sets.
ASTM A563 is the nut standard for carbon and alloy steel bolts, from general A307 bolts up to A325 and A490 structural bolts. Grade A suits low-strength bolts. Heavy hex Grade C is the A563 minimum for plain A325 bolts, though DH is commonly supplied in F3125 assemblies. Quenched and tempered Grade DH, with a 175 ksi proof stress plain (150 ksi galvanized), is used with galvanized A325 and with A490 bolts, and DH3 is the weathering-steel version. A194 2H nuts are an accepted equivalent for DH.
- Standard
- ASTM A563/A563M (latest edition)
- Grades
- A, C, DH, DH3; metric 8S, 10S and 10S3 heavy hex
- Styles
- Grade A in hex and heavy hex; C, DH and DH3 heavy hex
- Finish
- Plain, hot-dip galvanized to F2329 or mechanically galvanized
- Galvanized nuts
- Hot-dip galvanized nuts are tapped oversize after coating and proof tested; galvanized DH nuts also carry a lubricant
- Equivalent
- A194 Grade 2H accepted for Grade DH

What we supply
- Grade A
- Hex and heavy hex nuts for A307 bolts and anchor rods
- Grade C
- Heavy hex nuts, the minimum grade for plain A325 bolts
- Grade DH
- Plain or galvanized heavy hex nuts for A325 and A490
- Bolt sets
- Bolts, nuts and F436 washers supplied together
Which A563 nut for which bolt?
The nut must be at least as strong as the bolt, and galvanized bolts need nuts that were overtapped and lubricated after galvanizing.
| Bolt | Finish | Nut | Also accepted |
|---|---|---|---|
| F3125 Grade A325 Type 1 | Plain | A563 Grade C heavy hex (minimum) | C3, D, DH, DH3; DH is commonly supplied in F3125 kits |
| F3125 Grade A325 Type 1 | Hot-dip galvanized | A563 Grade DH heavy hex, galvanized and lubricated | A194 2H galvanized |
| F3125 Grade A490 Type 1 | Plain | A563 Grade DH | DH3 |
| F3125 Grade A490 Type 3 | Plain (weathering) | A563 Grade DH3 | – |
| ASTM A307 / F1554 Gr 36 | Plain or galvanized | A563 Grade A | Higher-strength grades |
Summarised from bolt manufacturers’ nut compatibility tables. Grade C is the A563 minimum for plain A325; DH is used for both plain and galvanized A325 when supplied as F3125 assemblies. A490 bolts are not hot-dip galvanized, so there is no galvanized nut for them (A490 bolts coated to ASTM F3393 zinc flake take DH nuts with the same coating).
A563 grade properties
Proof stress is the load the nut must carry without stripping or permanent deformation. Galvanized Grade A and DH nuts have lower values because they are tapped oversize.
| Grade | Material | Proof stress plain / galvanized | Hardness |
|---|---|---|---|
| A (heavy hex) | Carbon steel | 100 / 75 ksi | 116 to 302 HB |
| C | Carbon steel, may be quenched and tempered | 144 / 144 ksi | 143 to 352 HB |
| DH | Carbon steel, quenched and tempered | 175 / 150 ksi | 248 to 352 HB |
| DH3 | Weathering steel, quenched and tempered | 175 / 150 ksi | 248 to 352 HB |
Values summarised from ASTM A563 as published by bolt manufacturers.
Saudi Arabia requirements for structural nuts
Saudi Aramco covers structural bolting in 12-SAMSS-007. The first three points below are from an unofficial copy of the 2011 issue; we supply to the revision named in your purchase order.
| Requirement | What it means for the order |
|---|---|
| High-strength bolts | A325 bolts are used with A563 Grade DH nuts and F436 washers. |
| Galvanizing | A325 bolt assemblies are galvanized; A490 bolts are not. |
| Galvanized nuts | Overtapped after galvanizing and supplied with lubricant. |
| Assemblies (JTE practice, not a 12-SAMSS-007 clause) | We supply bolts, nuts and washers together as matched sets. |
Based on an unofficial copy of 12-SAMSS-007 (2011), which may be superseded; confirm against the current revision in your project specification. Check your structural drawings too.
Where A563 nuts are used
Every structural steel connection and most general carbon steel bolting.
Steel structures
Pipe racks, platforms and buildings.
Structural bolts
A325 and A490 bolt sets.
Anchor bolts
Grade A and DH nuts on F1554 rods.
Galvanized steel
Overtapped DH nuts for galvanized bolts.
Equipment
General machinery and skid bolting.
Bolt sets
Bolts, nuts and washers per connection.
Supplied as matched sets
Structural nuts are only as good as the bolt and washer they go with.
- A325 with DH nuts and F436 washers
- Same galvanizing process for the whole set
- Nuts lubricated after overtapping
- Rotational capacity test reports where specified
- Packed per connection type
Documents with every order
Nut, bolt and washer certificates travel together.
- EN 10204 3.1 MTC
- Proof load test results
- Galvanizing thickness report
- Lot traceability
- 3.2 with third-party inspection
A563 nut questions
Which nut goes with a galvanized A325 bolt?
An A563 Grade DH heavy hex nut, hot-dip galvanized, overtapped and lubricated. A194 2H galvanized nuts are an accepted equivalent.
Which nut goes with an A490 bolt?
A563 Grade DH, or DH3 for weathering-steel Type 3 bolts. A490 bolts are not galvanized.
Why are galvanized nuts tapped oversize?
The zinc on the bolt thread adds thickness, so the nut is tapped oversize after galvanizing to fit, then proof tested and lubricated.
How are A563 nuts marked?
Grade C heavy hex nuts carry three circumferential marks 120° apart; DH and DH3 nuts are marked with the grade. Grades C, C3, D, DH and DH3 also carry the maker’s or distributor’s symbol.
Can A194 2H nuts replace A563 DH?
Yes. A194 Grade 2H nuts are accepted as an equivalent to A563 Grade DH.
Updated
Related
F3125 A325 and A490 bolts
Structural bolts for these nuts.
F436 hardened washers
Washers for structural bolt sets.
ASTM A307 bolts
General bolts used with Grade A nuts.
Need structural bolt sets?
Send the bolt list from the steel drawings: we quote bolts, A563 nuts and F436 washers together.