ASTM A194 Grade 8 and 8M stainless heavy hex nuts
Austenitic stainless heavy hex nuts in 304 (Grade 8) and 316 (Grade 8M), as made or carbide solution treated, for B8 and B8M stud bolts in corrosive and chemical service.
A194 Grade 8 nuts are made from 304 stainless steel and Grade 8M nuts from 316, the molybdenum grade with better resistance to chlorides. An A suffix (8A, 8MA) means the nut has been carbide solution treated, which gives the best corrosion resistance and a lower hardness range. All four have an 80 ksi proof stress in heavy hex form. They pair with ASTM A193 B8 and B8M studs, and anti-seize is recommended because stainless threads gall easily.
- Standard
- ASTM A194/A194M (latest edition), Grades 8, 8M, 8A, 8MA
- Material
- Grade 8 and 8A: 304 (S30400); 8M and 8MA: 316 (S31600)
- Proof stress
- 80 ksi (550 MPa), heavy hex
- Hardness
- 8 and 8M: 126 to 300 HBW; 8A and 8MA: 126 to 192 HBW
- Sizes
- 1/4 in. and up; M12 and up
- Studs
- ASTM A193 B8 and B8M, Class 1 and Class 2

What we supply
- Grade 8 / 8M
- As-made 304 and 316 heavy hex nuts
- Grade 8A / 8MA
- Carbide solution treated nuts
- With studs
- Nuts packed with A193 B8 or B8M studs
- Washers
- 304 and 316 flat washers to match
A194 stainless nut grades
The number gives the steel; the letters give the condition and how the nut was made.
| Marking | Steel | Condition | Hardness |
|---|---|---|---|
| 8 | 304 | As made, not solution treated | 126 to 300 HBW |
| 8M | 316 | As made, not solution treated | 126 to 300 HBW |
| 8A | 304 | Carbide solution treated | 126 to 192 HBW |
| 8MA | 316 | Carbide solution treated | 126 to 192 HBW |
| 8B, 8MB | 304, 316 | Machined from bar (suffix B is not a separate grade) | As for the base grade |
Values summarised from ASTM A194 as published by nut manufacturers. Strain-hardened 8 and 8M nuts with higher proof loads are made under supplementary requirement S1 when ordered. Grade 8S is a different alloy (Nitronic 60), not strain-hardened 304.
Using 8 and 8M nuts on Saudi projects
Stainless nuts are chosen with the stud, the fluid and the outdoor exposure in mind.
| Point | What it means for the order |
|---|---|
| Stud match | Grade 8 nuts with B8 studs and 8M with B8M; strain-hardened nuts are worth specifying with Class 2 studs. |
| Chlorides | Coastal sites such as Jubail, Ras Tanura and Yanbu favour 316 (8M) over 304. |
| Galling | Apply a suitable anti-seize to stainless threads before assembly. |
| Line class | Stainless bolting is not listed in SAES-L-109 Table 5 (unofficial 2018 copy), so the grade comes from the project line class or data sheet. |
We supply to the stud and nut grades on your purchase order and line class. Based on an unofficial copy of SAES-L-109 (29 January 2018), which may be superseded; confirm against the current revision in your project specification.
Where 8 and 8M nuts are used
Anywhere carbon steel bolting would corrode or the flanges are stainless.
Stainless flanges
304 and 316 piping in chemical service.
Corrosive service
Chloride-laden, coastal and chemical exposure (8M preferred); for immersed seawater service ask about higher alloys.
Water treatment
Water treatment and process skids (8M for chloride-bearing water).
Coastal plants
Outdoor bolting near the sea.
B8M Class 2 studs
Higher-strength stainless stud assemblies.
Joint kits
Studs, nuts and washers packed per flange.
Matched to the stud
We supply the nut grade that suits the stud class and service.
- 8 and 8M as made
- 8A and 8MA solution treated
- Strain-hardened nuts on request
- Anti-seize on request
- Washers in matching steel
Documents with every order
Stainless grade is confirmed on every certificate.
- EN 10204 3.1 MTC
- Chemical analysis
- Proof load and hardness results
- PMI on request
- 3.2 with third-party inspection
A194 8 and 8M nut questions
What is the difference between 8 and 8M nuts?
Grade 8 is 304 stainless and Grade 8M is 316, which contains molybdenum and resists chlorides better.
What does the A in 8A or 8MA mean?
The nut has been carbide solution treated, which gives the best corrosion resistance and a lower hardness range.
Which nut goes with a B8M stud?
An A194 Grade 8M nut. B8 studs take Grade 8 nuts.
Do plain 8M nuts match B8M Class 2 studs?
Not fully: plain 8M nuts have an 80 ksi proof stress, below the strength of Class 2 studs, which is why strain-hardened nuts are often specified with them.
How do I stop stainless nuts galling?
Use an anti-seize compound on the threads and tighten at a steady, moderate speed.
Updated
Related
B8 and B8M stud bolts
Stainless studs for these nuts.
A194 2H nuts
Carbon steel nuts for B7 studs.
A2 and A4 stainless bolts
ISO 3506 metric stainless bolts.
Need stainless nuts with your studs?
Send the stud list: we quote B8 or B8M studs with matching 8 or 8M nuts.