Thread pitch chart for UNC, UNF, 8UN and metric bolts
Threads per inch for inch bolts and stud bolts, pitch for ISO metric coarse and fine threads, and the thread rule for flange stud bolts.
Inch fasteners are specified in threads per inch (TPI) and metric fasteners by pitch in millimetres. A 1/2″ UNC bolt has 13 TPI and an M12 coarse bolt has a 1.75 mm pitch. Flange stud bolts follow ASME B16.5: UNC threads up to 1″ diameter and the 8-thread series (8UN) above 1″. That is why a 1-1/2″ stud bolt has 8 TPI, not the 6 TPI of a 1-1/2″ UNC bolt.
Inch threads: UNC, UNF and 8UN
| Diameter | UNC (coarse) TPI | UNF (fine) TPI | Flange stud bolts (ASME B16.5) |
|---|---|---|---|
| 1/4″ | 20 | 28 | UNC |
| 5/16″ | 18 | 24 | UNC |
| 3/8″ | 16 | 24 | UNC |
| 7/16″ | 14 | 20 | UNC |
| 1/2″ | 13 | 20 | UNC (13) |
| 9/16″ | 12 | 18 | UNC (12) |
| 5/8″ | 11 | 18 | UNC (11) |
| 3/4″ | 10 | 16 | UNC (10) |
| 7/8″ | 9 | 14 | UNC (9) |
| 1″ | 8 | 12 | UNC (8) |
| 1-1/8″ | 7 | 12 | 8UN (8) |
| 1-1/4″ | 7 | 12 | 8UN (8) |
| 1-3/8″ | 6 | 12 | 8UN (8) |
| 1-1/2″ | 6 | 12 | 8UN (8) |
| 1-5/8″ | – | – | 8UN (8) |
| 1-3/4″ | 5 | – | 8UN (8) |
| 1-7/8″ | – | – | 8UN (8) |
| 2″ | 4.5 | – | 8UN (8) |
| 2-1/4″ | 4.5 | – | 8UN (8) |
| 2-1/2″ | 4 | – | 8UN (8) |
| 2-3/4″ | 4 | – | 8UN (8) |
| 3″ | 4 | – | 8UN (8) |
| 3-1/4″ | 4 | – | 8UN (8) |
| 3-1/2″ | 4 | – | 8UN (8) |
| 3-3/4″ | 4 | – | 8UN (8) |
| 4″ | 4 | – | 8UN (8) |
8UN keeps 8 threads per inch for every diameter above 1″, which gives large studs a finer, stronger thread and makes nuts easier to run on.
Metric threads: coarse and fine
| Size | Coarse pitch | Common fine pitch |
|---|---|---|
| M6 | 1 mm | 0.75 mm |
| M8 | 1.25 mm | 1 mm |
| M10 | 1.5 mm | 1.25 mm |
| M12 | 1.75 mm | 1.5 mm |
| M14 | 2 mm | 1.5 mm |
| M16 | 2 mm | 1.5 mm |
| M18 | 2.5 mm | 1.5 mm |
| M20 | 2.5 mm | 1.5 mm |
| M22 | 2.5 mm | 1.5 mm |
| M24 | 3 mm | 2 mm |
| M27 | 3 mm | 2 mm |
| M30 | 3.5 mm | 2 mm |
| M33 | 3.5 mm | 2 mm |
| M36 | 4 mm | 3 mm |
| M39 | 4 mm | 3 mm |
| M42 | 4.5 mm | 3 mm |
| M45 | 4.5 mm | 3 mm |
| M48 | 5 mm | 3 mm |
| M52 | 5 mm | 4 mm |
| M56 | 5.5 mm | 4 mm |
| M60 | 5.5 mm | 4 mm |
| M64 | 6 mm | 4 mm |
Metric fasteners are coarse thread unless a fine pitch is written in the size, for example M20 × 1.5.
How to identify a thread
- Measure the major diameter with a caliper.
- Inch: count the threads in one inch, or use a thread gauge for TPI.
- Metric: measure the distance between two adjacent crests (the pitch) with a pitch gauge.
- If a 1-1/8″ or larger stud has 8 TPI, it is 8UN flange stud thread, not UNC.
Thread pitch questions
What thread do stud bolts use?
Under ASME B16.5, flange stud bolts use UNC threads up to 1″ diameter and the 8-thread series (8UN) for larger diameters. ASTM A193 bolting follows the same rule.
What does 8UN mean?
A constant pitch series with 8 threads per inch, used for stud bolts above 1″ diameter regardless of size.
How many threads per inch does a 3/4″ bolt have?
10 TPI for UNC (coarse) and 16 TPI for UNF (fine).
What is the pitch of an M20 bolt?
2.5 mm for coarse thread; the common fine pitch is 1.5 mm, written M20 × 1.5.
Can metric and inch nuts be mixed?
No. Even where sizes are close, such as 1/2″ and M12, the pitch and thread form differ and the nut will not engage correctly.
Updated
Related
ASME B16.5 flange bolt chart
Stud sizes and lengths per flange.
Bolt torque calculator
Tightening torque by size and grade.
Bolt weight calculator
Estimate stud and nut weights.
Odd thread or size?
We cut and thread studs in Jubail in UNC, 8UN and metric threads.