+966 54 614 8678 [email protected] WhatsApp
JTE FastenersBolting & hardware, Al Jubail العربية Request a quote

Bolt weight calculator for stud bolts, nuts and threaded rod

Estimate the weight of stud bolts, heavy hex nuts and threaded rod in inch and metric sizes, in carbon steel, stainless, duplex or nickel alloy, for freight and lifting planning.

A stud bolt’s weight is roughly the volume of a cylinder at the thread’s pitch diameter times the steel density (7.85 g/cm³ for carbon and alloy steel). A 1″ × 6″ B7 stud weighs about 0.51 kg, and with two 2H heavy hex nuts the set weighs about 0.87 kg. An M20 × 150 mm stud weighs about 0.31 kg. Use the calculator for any size, length, material and quantity.

Calculator

Result

Inch stud bolt and heavy hex nut weights

Carbon or alloy steel, per 100 mm of stud length and per heavy hex nut
ThreadStud per 100 mmHeavy hex nut
1/2″-13 (UNC)0.081 kg0.028 kg
5/8″-11 (UNC)0.127 kg0.050 kg
3/4″-10 (UNC)0.187 kg0.082 kg
7/8″-9 (UNC)0.256 kg0.125 kg
1″-8 (UNC)0.336 kg0.181 kg
1-1/8″-8 (8UN)0.433 kg0.251 kg
1-1/4″-8 (8UN)0.543 kg0.337 kg
1-3/8″-8 (8UN)0.666 kg0.442 kg
1-1/2″-8 (8UN)0.801 kg0.566 kg
1-5/8″-8 (8UN)0.948 kg0.711 kg
1-3/4″-8 (8UN)1.108 kg0.878 kg
1-7/8″-8 (8UN)1.280 kg1.071 kg
2″-8 (8UN)1.465 kg1.289 kg
2-1/4″-8 (8UN)1.871 kg1.811 kg
2-1/2″-8 (8UN)2.327 kg2.458 kg
2-3/4″-8 (8UN)2.833 kg3.242 kg
3″-8 (8UN)3.389 kg4.178 kg
3-1/4″-8 (8UN)3.994 kg5.278 kg
3-1/2″-8 (8UN)4.649 kg6.557 kg
3-3/4″-8 (8UN)5.354 kg8.026 kg
4″-8 (8UN)6.108 kg9.700 kg

Estimated from the pitch diameter and ASME B18.2.2 heavy hex nut dimensions (width across flats 1.5d + 1/8″, thickness d − 1/64″), chamfers ignored. For stainless multiply by about 1.02.

Metric stud bolt and heavy hex nut weights

Carbon or alloy steel, per 100 mm of stud length and per heavy hex nut
ThreadStud per 100 mmHeavy hex nut
M12 × 1.750.073 kg0.024 kg
M14 × 20.099 kg0.036 kg
M16 × 20.133 kg0.051 kg
M20 × 2.50.208 kg0.102 kg
M22 × 2.50.256 kg0.122 kg
M24 × 30.300 kg0.180 kg
M27 × 30.387 kg0.254 kg
M30 × 3.50.474 kg0.326 kg
M36 × 40.688 kg0.564 kg

Metric heavy hex nut widths across flats from ASME B18.2.4.6M, thickness taken as the nominal diameter.

How the estimate works

  • Stud: π/4 × pitch diameter² × length × density. The pitch diameter is the nominal diameter minus 0.6495 × pitch.
  • Nut: hexagon area minus the hole, times the nut thickness, less 5% for chamfers.
  • Densities used: 7.85 g/cm³ carbon and alloy steel, 8.0 stainless, 7.8 duplex, 8.44 nickel alloy 625.
  • Stud length is measured end to end, as in ASME B16.5 tables. Coatings add little weight.

Bolt weight questions

How much does a 1″ × 6″ stud bolt weigh?

About 0.51 kg in carbon or alloy steel, and about 0.87 kg with two heavy hex nuts.

How much does a 1″ heavy hex nut weigh?

About 0.18 kg in steel, by ASME B18.2.2 dimensions.

How much does an M20 stud bolt weigh?

An M20 × 150 mm stud weighs about 0.31 kg in carbon steel; an M20 heavy hex nut adds about 0.10 kg.

Why use pitch diameter instead of nominal diameter?

Threads remove metal, so a threaded stud weighs less than a plain bar of the same nominal size. The pitch diameter gives a closer estimate.

Is the calculator accurate enough for invoicing?

No. It is an estimate for freight, packing and lifting plans, within about 5%. Invoices use actual weighed or counted quantities.

Updated

Related

Thread pitch chart

UNC, 8UN and metric threads.

ASME B16.5 flange bolt chart

Stud sizes and lengths per flange.

Bolt torque calculator

Tightening torque by size and grade.

Bolting for a shutdown?

Send the flange list: we quote studs, nuts and gaskets with weights for your logistics.

Request a quote+966 54 614 8678