How to choose a fastener supplier in Saudi Arabia
A buyer’s checklist for stud bolts, bolts and nuts on Saudi Aramco, SABIC and building projects: approvals, grades, certificates, coatings and the red flags that lead to rejections.
To choose a fastener supplier in Saudi Arabia, check five things: that the supplier is registered with the plant owner (Saudi Aramco, SABIC or the main contractor); that grades and nut pairs match the specification, such as SAES-L-109; that every lot ships with traceable EN 10204 3.1 certificates; that coatings and galvanizing follow the owner’s specification; and that parts can be machined or replaced locally during a shutdown. The checklist below explains each point and what to ask for.
- Who it is for
- Buyers, materials engineers and QA/QC inspectors
- Covers
- Stud bolts, bolts, nuts, washers and anchor bolts
- Specifications cited
- SAES-L-109, 12-SAMSS-007, 09-SAMSS-107, NACE MR0175, EN 10204
- Last reviewed
- October 2026
The supplier checklist
Ten checks, why each matters, and the document that proves it.
| Check | Why it matters | Ask for |
|---|---|---|
| 1. Registration with the owner | Saudi Aramco and SABIC plants buy from vendors registered with them or with the main contractor. | Vendor registration details for the owner concerned |
| 2. Quality system | ISO 9001 shows a documented system for material control and traceability. | A current ISO 9001 certificate with scope and expiry date |
| 3. Grade and matching nut | SAES-L-109 (Table 5) sets the stud and nut pair for each service; mixed pairs are a common rejection. | Grade, nut and temperature limits confirmed on the quotation |
| 4. Certificates | A 3.1 certificate must trace to heat and lot; 3.2 needs third-party inspection. | A sample 3.1 certificate from a past order |
| 5. Marking | Unmarked fasteners are rejected (12-SAMSS-007, 6.2.5.5). | Grade and maker marks on studs and nuts |
| 6. Sour service | B7M / 2HM, hardness-limited and tested piece by piece to NACE MR0175 / ISO 15156. | A hardness test report |
| 7. Coatings | At Saudi Aramco plants, coated bolting must meet 09-SAMSS-107; a generic PTFE topcoat may not. | The coating system name and the specification it meets |
| 8. Galvanizing | ASTM A153 or B695, nuts tapped oversize, and A490 and A193 excluded (12-SAMSS-007, 5.2). | The galvanizing standard and thread fit |
| 9. Local machining | In a shutdown nobody can wait for an import of one odd-length stud. | Workshop location and machining capability |
| 10. Imports | Imported regulated products need conformity certificates through SABER. | The conformity certificate where it applies |
Clause references from Saudi Aramco SAES-L-109 (29 January 2018) and 12-SAMSS-007 (2006 edition reviewed). Always use the current revision and your purchase order.
Local manufacturer, stockist or overseas exporter?
Each can be the right choice. The difference shows up when something goes wrong.
| Supplier type | Lead time | Special sizes | Certificates | After-sales |
|---|---|---|---|---|
| Local manufacturer with a workshop | Short for stock, days for machined parts | Yes, including parts copied from a sample | 3.1 from the maker itself | On site or close by |
| Trader or stockist | Short only for what is on the shelf | No, depends on imports | 3.1 from the original mill; check the traceability | Depends on location |
| Overseas exporter | Weeks, plus shipping and clearance | Yes, but slowly | Varies; check heat and lot | Far away; returns are hard |
Red flags that lead to rejection
If you see any of these on a quotation or a delivery, stop and ask.
A certificate that does not trace
A generic mill certificate with no heat number on the parts themselves.
A nut that does not match
For example a 2H nut offered with a B7M stud for sour service.
A coating with no specification
“PTFE coated” with no system name or specification.
Unmarked fasteners
No grade or maker’s mark on the head or the stud end.
Vague answers on temperature
No clear temperature limits for the grade being offered.
Claims without documents
“Largest” or “sole supplier” with no certificates or registration to back it.
What to put in your RFQ
A complete RFQ gets a complete quotation, and saves a round of questions.
Standard and grade
For example ASTM A193 B7 with A194 2H nuts, or the owner’s specification.
Size and length
Diameter, pitch and length, or flange class and size so the length can be taken from the ASME B16.5 bolt chart.
Coating
None, galvanized or PTFE, with the specification.
Quantity and spares
Number of sets and the spare allowance you need.
Certificates and inspection
3.1 or 3.2, plus PMI and hardness if required.
Delivery
Delivery city and the date you need it.
Supplier selection questions
What approvals should a fastener supplier in Saudi Arabia have?
At minimum ISO 9001, registration with the owner whose plant the bolts are going into, such as Saudi Aramco, SABIC or the main contractor, and the ability to issue EN 10204 3.1 certificates that trace to the lot.
Is ISO 9001 enough for Saudi Aramco projects?
No. ISO 9001 proves a quality system, but buying for Aramco plants also needs vendor registration and material that meets Aramco specifications such as SAES-L-109 and the purchase order.
What is the difference between a 3.1 and a 3.2 certificate?
A 3.1 certificate is issued by the maker’s independent inspection department; a 3.2 is also signed by the buyer’s representative or a third-party inspector. See 3.1 vs 3.2 explained.
Can imported fasteners be used on Saudi Aramco projects?
Yes, if they meet the specification and come from a source the purchase order accepts, with the required certificates and SASO requirements where they apply.
How do I check a stud bolt’s grade?
From the marks on the stud end and the nut (see fastener grade markings) and from the certificate that traces to the heat.
What should a supplier’s quotation include?
Grade and nut, size and length, coating and its specification, certificate level, lead time and delivery terms.
Updated
Related
Fasteners supplier in Saudi Arabia
Where we supply and the requirements we work to.
Fastener grade markings
How to read the marks on bolts and nuts.
MTC 3.1 vs 3.2
What each certificate level proves.
Want us to answer the checklist?
Send your RFQ and ask for our ISO certificate, vendor details and a sample 3.1 certificate.