+966 54 614 8678 [email protected] WhatsApp
JTE FastenersBolting & hardware, Al Jubail العربية Request a quote

Fasteners and stud bolts supplier in Saudi Arabia

Stud bolts, hex bolts, nuts, anchor bolts and flange bolting made and stocked in Al Jubail, and supplied to plants and projects across the Kingdom to Saudi Aramco, SABIC and Saudi Building Code requirements.

JTE Fasteners & Hardwares is a fastener manufacturer and supplier in Al Jubail, Saudi Arabia, founded in 2014. It is ISO 9001 certified, a registered Saudi Aramco and SABIC vendor, machines stud bolts and special fasteners in its own factory, and ships every order with EN 10204 3.1 certificates. Eastern Province sites are served directly from Jubail, and Riyadh and the rest of the Kingdom are supplied from there too.

Company
JTE Fasteners & Hardwares (Jarallah Bin Nasser Bin Shaflout Al-Qahtani Trading Establishment)
Base
Al Dana District, Al Jubail, Eastern Province
Founded
2014
Approvals
ISO 9001; registered Saudi Aramco and SABIC vendor
Manufacturing
In-house machining and threading in Jubail
Certificates
EN 10204 3.1 as standard; 3.2 with third-party inspection
Languages
English and Arabic
Phone
+966 54 614 8678

Where we supply in Saudi Arabia

Each industrial area has its own mix of plants and bolting. Our area pages go into the detail.

JTE supply areas in Saudi Arabia
AreaIndustrial baseTypical boltingMore
Al JubailJubail Industrial City, Jubail 2, King Fahad Industrial PortB7/2H, B7M, B16 and coated studs for petrochemical and refinery maintenanceJubail
Ras Al KhairMinerals complexes, desalination and power plantsDuplex, coated and structural bolting for marine exposureRas Al Khair
Dammam1st, 2nd and 3rd Industrial Cities, King Abdulaziz PortStructural bolts, anchor bolts and fabrication kitsDammam
Al Khobar and DhahranEPC and engineering contractor officesProject bolting packages with full documentsAl Khobar
Ras TanuraRefinery and export terminalSour service and coated stud boltsRas Tanura
RiyadhIndustrial cities and building projectsStructural bolts and anchors to the Saudi Building CodeRiyadh
Other citiesYanbu, Rabigh, Jeddah and elsewhereQuoted per order, with delivery terms on the quotationContact us

Saudi requirements we work to

Fasteners on Saudi sites are bought to the owner’s specification, not just to ASTM. These are the ones we quote against most often.

Saudi fastener requirements
RequirementWhere it appliesWhat we supplyPage
Saudi Aramco SAES-L-109Piping flange bolting, flanges and gaskets in Aramco plantsStud and nut grades by service (Table 5), flange and gasket limitsStud bolts
Saudi Aramco 12-SAMSS-007Structural and miscellaneous steelA325 / A490 with A563 DH and F436, F1554 anchor bolts, A153 / B695 galvanizingStructural bolts
Saudi Aramco 09-SAMSS-107Coated bolting in aggressive environmentsCeramic-fluoropolymer coating to the specificationCoated studs
NACE MR0175 / ISO 15156Sour serviceHardness-limited B7M / 2HM with test reportsB7M
SABIC and other ownersPetrochemical, water and minerals plantsThe material specification on the purchase orderQuality
Saudi Building Code SBC 306 / SBC 304Steel buildings and anchorage to concreteBolts and anchors to the engineer’s designAnchors
SASO / SABERImported regulated productsConformity certificates where they applyAsk us

Summary only. The current revision of each specification and your purchase order always govern.

What we make and supply

One supplier for the bolting, the flange and the gasket.

Stud bolts

B7, B7M, L7, B16, B8, A453 660 and duplex, with A194 nuts.

Hex bolts and nuts

ASTM, ISO and DIN, class 8.8 to 12.9 and stainless.

Anchor bolts

F1554, A36 and B7, straight, bent and galvanized.

Flanges and gaskets

ASME B16.5 and B16.47 with matching bolting.

Shutdown kits

Studs, nuts and gaskets kitted and marked per flange.

Why a Jubail base matters for Saudi projects

Most of the Kingdom’s petrochemical and refining capacity sits on the Gulf coast between Ras Al Khair and Dammam, with Jubail in the middle. When a unit is down or a damaged stud turns up during a shutdown, the distance between the workshop and the plant decides how long the delay lasts.

So we keep the common grades on the shelf and machine the rest: studs in odd lengths, parts copied from a sample, and bolting in materials nobody stocks. Every piece carries grade and heat marks and comes with a 3.1 certificate, because an undocumented bolt is rejected at the gate however correct it is.

For projects outside the Eastern Province, from Riyadh to the west coast, we prepare the full order in Jubail with its documents and then supply it, so the package arrives ready to install.

Flanged pipe joints clamped with stud bolts and heavy hex nuts
Flange bolting is most of what Saudi plants buy from us.

How ordering works

  1. Send the list or a sample

    Sizes, grades, coatings, quantities and delivery city, by the form, email or WhatsApp.

  2. Quote with stock and machining

    We confirm what is on the shelf, what we will machine, the price, lead time and delivery terms.

  3. Agree the specification and documents

    We read the specification and flag conflicts before production, and send sample certificates on request.

  4. Machine, mark and kit

    Cut, threaded, grade and heat marked, and kitted flange by flange where needed.

  5. Deliver with certificates

    Each order ships with EN 10204 3.1 certificates and any reports the order calls for.

Why buy from a Saudi manufacturer

Close to the plants

Jubail sits at the centre of the Kingdom’s petrochemical industry, so Eastern Province sites are a short drive away.

Machine, not wait

When a part is not on the shelf, we machine it locally instead of waiting for an import.

Documents right first time

3.1 certificates as standard, and grade and heat marks on every piece.

Questions about fastener supply in Saudi Arabia

Who supplies stud bolts in Saudi Arabia?

Saudi Arabia has several local fastener manufacturers and stockists, most of them in the Eastern Province close to the plants. JTE Fasteners is one of them: a manufacturer and supplier in Al Jubail since 2014, ISO 9001 certified, a registered Saudi Aramco and SABIC vendor, and machining stud bolts in its own factory.

Is JTE Fasteners a Saudi Aramco approved vendor?

Yes. JTE is a registered vendor with Saudi Aramco and SABIC and is ISO 9001 certified. Ask for the vendor registration details with your RFQ if your purchasing team needs them.

Do you supply outside the Eastern Province?

Yes. We supply from our factory in Al-Jubail to the Eastern Province, Riyadh and the rest of the Kingdom. Delivery terms and time are stated on each quotation.

Which standards do you work to?

ASTM, ASME, ISO, DIN and EN, plus the Saudi owners’ requirements: Saudi Aramco SAES-L-109, 12-SAMSS-007 and 09-SAMSS-107, SABIC material specifications, and the Saudi Building Code (SBC 304 and SBC 306) for building work.

Can you make non-standard fasteners?

Yes. Stud bolts, threaded rod and special fasteners are cut and threaded in our factory in Al-Jubail from certified material, including odd lengths and parts copied from a sample.

What certificates come with an order?

EN 10204 3.1 certificates traceable to heat number with every order; 3.2 with third-party inspection when requested; hardness and PMI reports where the specification asks for them.

Can you prepare shutdown bolting kits?

Yes. We kit studs, nuts and gaskets flange by flange, marked and certified. See shutdown bolting kits.

Can I deal with you in Arabic?

Yes. Our team handles quotations, documents and follow-up in Arabic and English.

Updated

Related

How to choose a fastener supplier

A buyer’s checklist for Saudi projects.

Company profile

JTE facts on one page.

Quality and certificates

ISO 9001, certificates and inspection.

Bolting for a site in Saudi Arabia?

Send the list, the grade and the delivery city: we quote stock, machining and delivery.

Request a quote+966 54 614 8678